The Wemo smart switch allows you to control the lights using your phone or with voice commands. As convenient as that sounds, you might still face some issues with your Wemo that require a factory reset.
Don’t fret; resetting your smart switch isn’t that complicated.
In today’s article, I will go over the common problems that need a reset. Additionally, I’ll tell you how to reset Wemo switch devices and what to do if resetting doesn’t cut it.
Let’s get right into it!
When Do You Need to Factory Reset the Wemo Switch?
There are many scenarios where resetting your Wemo is necessary.
Here’s a list of five common situations that might require you to reset the switch:
Connecting to a New Wi-Fi Network
After changing your Wi-Fi password or installing a new router, you might not be able to adjust the Wi-Fi settings on your smart switch.
So, you’ll need to reset the device to connect to the new Wi-Fi network.
Wemo Switch Constantly Losing Connection
Some software glitches can cause your Wemo switch to lose connection. You won’t always be able to pinpoint the exact problem, but resetting the switch can often fix most of these issues.
Wemo App Can’t Detect the Device
If your Wemo app can’t detect the switch, first try restarting the device and the app. If that doesn’t fix the issue, you can perform a factory reset and set up your switch again.
Switch Controls Aren’t Working Properly
It can be a bummer when you can’t control your switch using the app. You also need to make sure you have the latest version of the Wemo app. If that doesn’t solve the issue, you can try resetting the device.
Failed Switch Setup
Did you face an issue while setting up your Wemo switch? Well, this could also call for a reset before you try to set up the device again.
How Do You Reset Wemo Switch?
You can reset your Wemo switch either through the app or manually. In any case, it’s important to note that resetting the switch will erase all settings and data on your device.
That being said, let’s check each method in detail.
Resetting the Wemo Switch Through the App
The Wemo app allows you to reset your switch in no time. Before we begin, make sure you have the latest version of the Wemo app.
Then, proceed with the below steps for both iOS and Android devices:
- Open the Wemo app on your phone.
- Tap “Edit” and press on the arrow next to the Wemo switch device.
- Then, select “Reset Options” and tap “Factory Restore” at the bottom of the page.
- After that, tap “Yes” to confirm and wait until the process is complete.
Resetting the Wemo Switch Manually
The following steps will guide you through resetting the Wemo smart switch manually:
- First, locate the “Restart” and the “Reset” buttons on your switch.
- Then, press and hold both buttons for five seconds.
- The switch’s Wi-Fi icon will flash green, then amber. That means the reset is complete.
- Finally, set up the Wemo switch using the app.
How Can You Set Up Wemo Smart Switch After Resetting?
After resetting your Wemo switch, you’ll need to set it up again
Here’s how:
- First, open the Wemo app on your phone and tap “Login.”
- Then, enter your email and password to see a list of your Wemo devices.
- Next, go to the “Wi-Fi Settings” on your phone and connect to Wemo default Wi-Fi.
- Open the Wemo app again and enter a name for your device.
- Press “Next” and select your Wi-Fi network.
- Enter your Wi-Fi password and wait for your Wemo smart switch to connect to the network.
- Once the process is complete, you’ll be redirected to the devices list.
What if Resetting the Wemo Switch Didn’t Solve the Issue?
Performing a factory reset on your device can solve most of the common glitches. However, it can’t solve hardware problems.
So, if resetting the device didn’t solve the issue, you might want to contact Wemo support for further help.
Key Takeaways
There are many situations where you might need to reset Wemo switches. For starters, your device requires a reset if you need to connect to a new Wi-Fi network.
Additionally, a reset can come in handy when the switch controls aren’t working properly or when the device is facing connection issues. Finally, you can reset the switch when the app can’t detect the device and when your setup fails.
You can reset the Wemo switch either manually or through the app. In any case, you’ll need to set up the device again. Hopefully, this will fix the issue you’re facing!
Patrick Ward